Uwell Crown 4 Mod

Colour Purple

This item is currently only available for delivery to NZ addresses.

Suggested Products

Product Details

  • The Basics

    Simple to use and premium construction. Choose between power mode and temperature control, and hit at up to 200W.

  • Features & Tips


    • Use this unit with two brand new matching 3000mAh batteries and use a separate 18650 charger for best results.
    • Easy to use, intuitive, and powerful mod.
    • Switch on and off press power button 5 times within 2 seconds
    • Flip the screen by holding the + and – buttons for 2 seconds.
    • Choose your mode by pressing the power button 3 times within 2 seconds. The mode will blink, then press + or – to select mode.
    • Simple power mode that will work on most coils, but more prone to dry hits with lots of chain vaping. As the battery charge decreases, the unit will adjust
    • Specialized temperature control with Uwell Crown 4 coils.
    • Temperature Control Mode: for TC coils from other brands.
    • Lock/unlock the device by holding the power button and – button for 2 seconds.
    • For more detailed explanations of the settings, read the instruction manual with the unit.

  • What's in the box


    • x1 UWELL Crown 4 mod
    • x1 USB cable
    • instruction manual
    • Specs

      • Power and range: 5-200W
      • Modes: Wattage (power mode)/SS904 TC mode (for use with the UWELL Crown 4 tank and SS904L coils only), TCR mode for temperature control with other tanks/coils.
      • Coil resistance minimum: 0.1?-3? (power mode)/0.1?-1? (TC mode)
      • Temperature range: 200-600F/100-315C
      • Safety: Short-circuit protection
      • Connection threading for tank: 510 (standard)
      • Charging: USB
      • Material: Zinc alloy, aluminium
      • Dimensions: 52.5x25x84mm
      • Weight: 169g
    • Troubleshooting

      • Unit reading ‘LOW BATTERY? Charge the batteries.
      • Unit reading ‘HIGH RESISTANCE/LOW RESISTANCE’? Change the coil.
      • Unit reading ‘NO ATOMIZER FOUND’? The tank isn’t detected. Check the connection points and/or change the coil.
      • Unit reading ‘ATOMIZER NEW/OLD’? Shows when you change the tank. Select NEW when you’ve changed the coil.
      • Unit reading ‘ATOMIZER SHORT’?  A short circuit has occurred, change the coil and try again.

    You Might Also Like

    0 Customer Reviews